Jewelry Magnetic tumbler series polishing machine
2.With digital circuit,reversible time can be set any time.
3.Electrical parts are made by imported material to extend the file of machine.
4.Elborate design and cinvenient operation
5.When polishing chamber is took out of machine,tumber will stop automatically to save power.
-
Yihui brand magnetic polishing machine is suitable for the polishing of gold, silver, copper, zinc, platinum and other non-magnetic materials. It uses the force of the driving magnetic field to conduct the stainless steel needle grinding material to produce rapid rotation, high rotation, floating, vibration, reversing and rolling, turning up and sliding over The surface of the workpiece, the inner hole, the inner and outer teeth and the surface, and the uneven surface are rubbed. Achieve high-efficiency removal of burrs, oxide films, lines, polishing, cleaning parts, etc.
Technical paramater
Model M.MT.P2500 Outline size 450*429*530mm N.W 37KG Rated power 1100W Rated voltage 220V.50HZ Motor speed 1400rmp/min Polishing amount 2500g Polihing chamber size φ260*H160mm 
NOTE
1. Do not put iron, cobalt, nickel and other objects that are attracted to magnetism in the polishing bucket.
2. The machine should be placed in ventilated and dry place, and the surrounding temperature should not exceed 40°C.
3. The machine should be placed on flat and stable ground, and the balance must be adjusted.
4. The input power supply should pass through the air and safety switch. The voltage must be stable and equal to the voltage of the machine. The machine is equipped with frequency conversion controller and must have the good grounding
-
